Commit graph

333 commits

Author SHA1 Message Date
uqs
d3952523fe
pwm3360 driver cleanup and diff reduction to adns9800 (#15559)
* Diff reduction between ADNS9800 and PMW3360 drivers.

They are very similar devices. This (somewhat) unreadable diff is
essentially a no-op, but it makes a `vimdiff` between the 2 drivers much
more readable.

* Cleanup pwm3360 driver some more.

Remove redundant calls to spi_start() and spi_stop(), as pmw3360_write()
will already call these.
2021-12-27 21:26:09 +11:00
Alabastard-64
f08824f6eb
Fix for SPI write timing in PMW3360 driver (#15519)
Timing does not match Pixart documentation for this sensor (may have been carried forward from adns9800).
Not aware of any issues coming from this currently.
It should only cause issues when writing to multiple registers in succession which currently only happens during initialization for the PMW3360.
This should prevent future issues with write operations if other features of the sensor are added.
2021-12-27 21:18:35 +11:00
Dasky
7f7364c559
[Core] Split support for pointing devices. (#15304)
* Draft implementation

* formatting

* fix combined buttons

* remove pimoroni throttle

* sync pointing on a throttle loop with checksum

* no longer used

* doh

Co-authored-by: Drashna Jaelre <drashna@live.com>

* switch pimoroni to a cpi equivalent

* add cpi support

* allow user modification of seperate mouse reports

* a little tidy up

* add *_RIGHT defines.

* docs

* doxygen comments

* basic changelog

* clean up pimoroni

* small doc fixes

* Update docs/feature_pointing_device.md

Co-authored-by: Drashna Jaelre <drashna@live.com>

* performance tweak if side has usb

* Don't run init funtions on wrong side

* renamed some variables for consistency

* fix pimoroni typos

* Clamp instead of OR

* Promote combined values to uint16_t

* Update pointing_device.c

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-12-27 12:05:51 +11:00
QMK Bot
f5995901b0
[CI] Format code according to conventions (#15541) 2021-12-22 17:09:50 +11:00
Ryan
77d3e564f7
Migrate RN42 to UART driver and refactor (#15492) 2021-12-22 16:51:39 +11:00
QMK Bot
b33ecce392 Merge remote-tracking branch 'origin/master' into develop 2021-12-15 21:41:42 +00:00
Drashna Jaelre
aed64aaef4
[Core] Fix Sensor driver code (#15484) 2021-12-15 13:41:07 -08:00
Drashna Jael're
f92d153532
Merge remote-tracking branch 'origin/master' into develop 2021-12-11 10:28:29 -08:00
Xelus22
b09c44ced7
[Core] Add configuration of PMW3360 lift off distance (#15424)
* sensor code add

* update documentation

* add default #define

* Update drivers/sensors/pmw3360.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-12-08 23:52:07 -08:00
Drashna Jaelre
26febb7c24
Expand rotational range for PMW3360 Optical Sensor (#15431) 2021-12-08 07:38:09 -08:00
Joel Challis
5e9c29da0d
Tidy up adjustable ws2812 timing (#15299) 2021-11-25 19:35:06 +00:00
Joel Challis
282e916d86
Remove use of __flash due to LTO issues (#15268) 2021-11-24 18:38:49 +11:00
Drashna Jaelre
56e3f06a26
Rework and expand Pointing Device support (#14343)
Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>
2021-11-14 22:03:24 -08:00
Purdea Andrei
76fb54403c
haptic: Feature to disable it when usb port is not configured or suspended. (#12692)
This also add support for specifying a LED pin to indicate haptic status,
and also adds support for a haptic-enable pin, which is useful to turn off
the boost converter on the solenoid driver.
2021-11-02 16:54:29 +11:00
Drashna Jaelre
d05b3da83e
[Bug] Fix unterminated ifdef in ISSI 3733 driver (#15014) 2021-11-02 13:31:43 +11:00
donicrosby
0c72501763
Enable de-ghosting for RGB/LED matrix on all ISSI LED drivers (#14508)
* Initial work for de-ghost enable

* Dumb mistake with the redefine

* Added Copywrite stuff on source files

* Fixed whitespace errors

* Added support for all ISSI LED drivers

* Updated docs for support for ISSI LED driver pull-up pull-down

* Applied clang format

* Added 'boolean' flag to enable de-ghosting for the is31fl3731 IC

* Fixed some of the grammer in the docs

* Fixed comment placement and grammer of comment

* Fixed whitespace errors from lint

Co-authored-by: donicrosby <donicrosby1995@gmail.com>
2021-11-02 10:40:01 +11:00
lalalademaxiya1
f4ea262c17
Add a new led driver for Keychron's keyboards. (#14872)
* Add a new led driver for Keychron's keyboards.

* Update ckled2001.c/ckled2001.h.

* Update ckled2001.c/ckled2001.h.

* Update ckled2001.c/ckled2001.h.

* Update ckled2001.c

* Add a new led driver

* Update ckled2001.c

* Update ckled2001.c

* Update ckled2001.c

* Update ckled2001.c

* Delete ckled2001.c

* Create ckled2001.c

* Update ckled2001.c

* Update chibios-contrib

Co-authored-by: keychron-dev <85598583+keychron-dev@users.noreply.github.com>
Co-authored-by: lokher <lokher@gmail.com>
2021-11-02 09:43:53 +11:00
Drashna Jaelre
9d235d4fc5
[Core] Change OLED task function to be boolean (#14864)
* [Core] Add kb level callbacks to OLED driver

* Update keyboards and keymaps

* Update docs

* Update userspace configs

* Add fix for my keymap ...

* update lefty
2021-11-02 09:42:50 +11:00
Joel Challis
92385e30cd
Manually format develop (#15003) 2021-11-01 19:18:33 +00:00
Joel Challis
fb739a67c9
Enable configuration of PWM frequency for IS31FL3733B (#14983)
* Enable PWM frequency for IS31FL3733B

* Document config option

* clang
2021-10-30 15:13:40 +01:00
QMK Bot
c3c562cbb6 Merge remote-tracking branch 'origin/master' into develop 2021-10-24 17:46:55 +00:00
Ryan
6ee29d9aa6
Tidy up ADNS9800 and PMW3360 firmware blobs (#14936) 2021-10-24 10:46:20 -07:00
Joel Challis
0093d3d761
Initial USB2422 driver (#14835) 2021-10-22 00:49:58 +01:00
Joel Challis
d4be4b67a2
Relocate PS2 code (#14895)
* Relocate ps2 protocol code

* clang

* Move makefile logic
2021-10-20 21:18:49 +01:00
Stefan Kerkmann
e50867d52d
[Core] Add support for RISC-V builds and GD32VF103 MCU (#12508)
* Add support for RISC-V builds and GD32VF103 MCU

* Add toolchain selection in chibios.mk based on the mcu selected in
mcu_selection.mk
* Reorder and added comments to chibios.mk to have a streamlined makefile
* Add GD32VF103 mcu to possible targets for QMK.
* Add STM32 compatibility for GD32VF103 MCU, this is hacky but more efficent
  then rewriting every driver.
* Add GigaDevice DFU bootloader as flash target, please note that
  dfu-util of at least version 0.10 is needed.
* Add analog driver compatibility
* Add apa102 bitbang driver compatibility
* Add ws2812 bitbang driver compatibility
* Add eeprom in flash emulation compatibility
* Allow faster re-builds with ccache

* Add SiPeed Longan Nano to platform files

* Add SiPeed Longan Nano Onekeys

* Make quine compatible with other bootloaders

* Support builds with picolibc

* Add risc-v toolchain to arch and debian/ubuntu scripts
2021-10-18 16:23:20 +11:00
Joel Challis
dace4d5f0d
Remove QWIIC_DRIVERS (#14174) 2021-10-09 14:48:27 +01:00
Ryan
db41a3426c
Improve Adafruit BLE configuration defines (#14749)
* Improve Adafruit BLE configuration defines

* Formatting
2021-10-08 16:15:20 +01:00
Nick Brassel
b2a186cf92
Purge uGFX. (#14720)
* Purge uGFX.

* Remove remnants of visualizer.

* Remove remnants of uGFX.
2021-10-07 10:57:48 +11:00
Ryan
20ea5f3fb5
Relocate Adafruit BLE code (#14530) 2021-09-21 19:58:46 +10:00
QMK Bot
bf23e4647b Merge remote-tracking branch 'origin/master' into develop 2021-09-15 17:07:47 +00:00
Drashna Jaelre
169d5bd21d
[Bug] Fix IS31fl3741 driver to accept 1 or 2 addresses (#14451)
Co-authored-by: Joel Challis <git@zvecr.com>
2021-09-15 10:07:08 -07:00
Joel Challis
0ca4a56a04
Refactor use of STM32_SYSCLK (#14430)
* Refactor use of STM32_SYSCLK

* clang
2021-09-14 12:18:36 +10:00
JayceFayne
767f2c0284
[Core] Add is_oled_scrolling (#14305) 2021-09-05 09:09:20 -07:00
Xelus22
4e1c5887c5
[Core] Refactor OLED to allow easy addition of other types (#13454)
* add docs

* core changes

* update keyboards to new OLED

* updated users to new OLED

* update layouts to new OLED

* fixup docs

* drashna's suggestion

* fix up docs

* new keyboards with oled

* core split changes

* remaining keyboard files

* Fix The Helix keyboards oled options

* reflect develop

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-24 16:28:26 +10:00
Drashna Jaelre
e08d6a33fc
[Core] Fix copypasta issue with pmw3360 sensor config (#14106) 2021-08-21 18:34:04 -07:00
Drashna Jaelre
da1c011afc
Improve pmw3360 sensor and make it more hardware agnostic (#14097) 2021-08-20 21:14:23 -07:00
Nick Brassel
afd3bcbf45
Fix up compilation issues. (#14095) 2021-08-21 13:38:38 +10:00
Dasky
7f1c90b7a8
[Core] Speed up pimoroni trackball driver (#13823) 2021-08-19 11:58:17 -07:00
Joel Challis
1bb7af4d44
Relocate platform specific drivers (#13894)
* Relocate platform specific drivers

* Move stm eeprom

* Tidy up slightly
2021-08-17 23:43:09 +01:00
Drashna Jaelre
7ef4d0c886
Fix pmw3360 code to only output debug info if mouse debugging is enabled (#13993) 2021-08-13 14:20:47 -07:00
Joel Challis
70fb3e1aaf
__flash? (#13799) 2021-07-31 14:35:30 +01:00
Joel Challis
206a995ccd
Move some led drivers to common folder (#13749)
* Move some led drivers to common folder
2021-07-31 14:31:09 +01:00
Dasky
aeb252435d
[develop] Fix pimoroni trackball read address (#13810) 2021-07-31 06:12:19 -07:00
Joel Challis
3858a784c7
Align AW20216 driver (#13712)
* Align AW20216 driver

* Update drivers/awinic/aw20216.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Review comments

* formatting fixes

* stop if start failed?

* review comments

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-27 23:55:51 +01:00
Drashna Jaelre
9e782e4f14
[Bug] Include gpio.h in solenoid driver for GPIO Control functions (#13716) 2021-07-25 21:24:47 -07:00
Joel Challis
f945c352e7
Haptic: driver-> feature (#13713) 2021-07-25 19:14:58 -07:00
Chris Cullin
70267b35c3
Dual RGB Matrix IS31FL3737 driver support to address #13442 (#13457)
* initial commit

* removed changes to write_pwm_buffer

* backward compatbility added

* fixed issue with backward compatibility

* documentation update

* removed unneccessary comment. branched from master

* updated per comments #13457

* removed blank line

* cformat on diff files
2021-07-15 22:52:05 +01:00
Chris Cullin
9c74fd14bc
Enable g_is31_leds PROGMEM for RGB Matrix IS31FL3737 driver (#13480) 2021-07-12 08:51:23 -07:00
Gigahawk
6ac037aa3c
AW20216 use register increment for framebuffer flushes (#13430) 2021-07-03 08:01:23 -07:00
Stefan Kerkmann
117bff17ba
[Core] Unite half-duplex and full-duplex serial drivers (#13081)
* Unite half-duplex and full-duplex serial driver.

* Add full duplex operation mode to the interrupt based driver
* Delete DMA UART based full duplex driver
* The new driver targets #11930

* Fix freezes with failing transactions in half-duplex

* Increase default serial TX/RX buffer size to 128 bytes

* Correctly use bool instead of size_t

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-07-02 08:24:08 +10:00
Gigahawk
1ea01765e1
Allow settable SPI divisor for AW20216 driver, set default to 4 (#13309) 2021-06-23 19:57:46 +10:00
QMK Bot
531f34d2a0 Merge remote-tracking branch 'origin/master' into develop 2021-06-23 09:52:39 +00:00
David Hoelscher
6e1ed1c9d3
Optional OLED splash screen and fixed OLED i2c execution time saving (#12294)
* Made OLED splash screen optional to reduce memory and fixed OLED i2c execution time saving

* moved OLED address updates into their respective conditional checks
2021-06-23 19:52:06 +10:00
Purdea Andrei
dd16d3cc7e
eeprom_i2c driver: added EXTERNAL_EEPROM_WP_PIN configuration option. (#12617) 2021-06-21 19:34:28 -07:00
QMK Bot
e28d7ab58c Merge remote-tracking branch 'origin/master' into develop 2021-06-21 20:00:32 +00:00
Drashna Jaelre
6901411bca
Move optical sensor code to drivers folder (#13044) 2021-06-21 21:00:11 +01:00
QMK Bot
40bf61118e Merge remote-tracking branch 'origin/master' into develop 2021-06-20 16:38:52 +00:00
Ryan
90e57b7b0a
OLED font easter egg (#13269) 2021-06-20 09:38:21 -07:00
Roland Huber
e4c5b1bbbb
Add Per Key exclusions for Haptic Feedback (#12386)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 19:28:54 -07:00
Ryan
37fba09021
ST7565 invert (#13237) 2021-06-19 18:51:35 +10:00
Ignaz Kevenaar
0311c8036d
Add oled_invert (#13172)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 01:08:22 +10:00
Nick Brassel
172e6a7030
Extensible split data sync (#11930)
* Extensible split data sync capability through transactions.

- Split common transport has been split up between the transport layer
  and data layer.
- Split "transactions" model used, with convergence between I2C and
  serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
  matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
  transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
  failed transactions when interrupts are disabled on the slave due to
  atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
  that they still build due to firmware size restrictions.

* Fixup LED_MATRIX compile.

* Parameterise ERROR_DISCONNECT_COUNT.
2021-06-18 09:10:06 +10:00
fauxpark
d04f7bc160 Merge remote-tracking branch 'upstream/master' into develop 2021-06-17 17:22:01 +10:00
Ryan
2f08a34394
OLED driver tweaks (#13215) 2021-06-17 17:14:23 +10:00
Jonathan Rascher
83ee79565c
Fix overrun in oled_write_raw when not at (0, 0) (#13204) 2021-06-15 22:30:37 -07:00
Jonathan Rascher
d59f8d1c02
Fix overrun in st7565_write_raw when not at (0, 0) (#13209) 2021-06-15 22:30:27 -07:00
Ryan
b2fdd48744
Add ST7565 LCD driver (#13089)
Co-authored-by: Joakim Tufvegren <jocke@barbanet.com>
2021-06-10 17:16:09 +10:00
Gigahawk
32b2ac0a80
GMMK Pro RGB Support (#13147)
* Enable SPI1 for GMMK pro

* Setup initial boilerplate for new LED driver

* RGB matrix minimally functional

* Map full LED matrix

* Return keymap to default

* Fix printscreen LED mapping

* Reduce max brightness

* Default values for AW20216

* Add documentation for AW20216

* Disable console and warnings

* Run cformat

* Update drivers/awinic/aw20216.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* make aw struct match issi struct

Co-authored-by: Drashna Jaelre <drashna@live.com>

* add led location defines

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Use led pin definitions in keyboard.c

* Add driver indices to led map

* Fix elif typo

* Run cformat

* Update docs

* Fix typo in docs

* Document global brightness limits

Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-10 11:40:25 +10:00
Ryan
17d0fad762
spi_master Kinetis support (#13098) 2021-06-08 19:54:33 +10:00
Ryan
261d94ce34
Tidy up spi_master includes (#13053) 2021-06-03 16:26:41 +10:00
Nick Brassel
597d2e0e7b
Fix up WS2812 SPI driver on F072. (#13022) 2021-06-03 09:48:16 +10:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
github-actions[bot]
6c5e94061c
[CI] Format code according to conventions (#12838)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-05-10 03:15:00 +10:00
Purdea Andrei
60a39f4f5d
haptic: correct size of reserved field in the haptic structure. This saves 1 byte of wasted SRAM. (#12483)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-05-08 20:45:41 -07:00
Nick Brassel
a0089aa345
Fixup Satisfaction75 bootprocess. (#12621)
- Use normal ChibiOS I2C driver.
- Move drawing code to housekeeping -- previously it was during matrix
  scan, which gets executed during bootmagic checks. However, bootmagic
  is invoked before QWIIC subsystem is enabled, which means I2C isn't
  configured yet. All I2C calls to the OLED fail with timeouts while
  bootmagic is being checked. Housekeeping ensures this is executed once
  the system has initialised and settled.
- QWIIC OLED driver: properly clear out OLED buffer when clearing screen.
2021-04-19 13:08:01 +10:00
Joshua Diamond
0b63fb5e81 Merge branch 'master' into develop 2021-02-14 20:26:22 -05:00
Ryan
9ee1282019
LED Matrix: rename LED_DRIVER_LED_COUNT to DRIVER_LED_TOTAL (#11858) 2021-02-15 11:55:13 +11:00
github-actions[bot]
8e8b7113dc
Format code according to conventions (#11907)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-15 11:53:15 +11:00
Nick Brassel
f53e41ac81
Add support for analog USBPD on STM32G4xx. (#11824)
* Add support for analog USBPD on STM32G4xx.

* Split up to a list of driver types, allow for custom.
2021-02-15 08:56:13 +11:00
github-actions[bot]
c27a778281
Format code according to conventions (#11905)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-15 06:55:43 +11:00
QMK Bot
39ed48f7a7 Merge remote-tracking branch 'origin/master' into develop 2021-02-08 21:33:45 +00:00
Sergey Vlasov
627ceebef3
ws2812: Fix number of nops for AVR at 8 MHz (#9559)
* ws2812: Fix number of nops for AVR at 8 MHz

When trying to calculate the number of nops for AVR running at 8 MHz,
the value of `w3` is expected to be negative; however, because `F_CPU`
is defined in tmk_core/avr.mk with the `UL` suffix, the preprocessor
performs its calculations using `unsigned long`, getting a very large
positive number instead of the expected negative number; this then
results in generating code with a huge number of nops.  Fix the broken
calculations by performing a comparison before subtraction, so that the
unsigned number wraparound does not occur.

The keyboard which triggers the problem is `handwired/promethium`; the
buggy code silently compiles, but the resulting timings would be
completely wrong.

* ws2812: Clean up the code after the 8 MHz fix

Remove old code which was unsuccessfully trying to clamp negative w1, w2
and w3 values to 0, and set w1_nops, w2_nops and w3_nops directly.
2021-02-09 08:33:04 +11:00
Drashna Jaelre
6b9a7e21e9
Include stdbool.h in uart.h (#11728) 2021-01-30 18:35:16 +11:00
Dasky
d92ffd1157
Adds AT90USB162 support (#11570)
* at90usb162 support

* fix missing bracket

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-29 19:53:56 -08:00
Ryan
30b46fad57
UART driver refactor (#11637) 2021-01-27 17:42:49 +11:00
QMK Bot
296552e358 Merge remote-tracking branch 'origin/master' into develop 2021-01-15 21:43:07 +00:00
kb-elmo
3d70766327
Add BGR byte order for WS2812 drivers (#11562)
* add byte order bgr for ws2812

* update docs for driver change

* Update ws2812_driver.md

* Update docs/ws2812_driver.md

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-16 08:42:30 +11:00
Nick Brassel
34446b79d7
Split up QWIIC_ENABLE to use QWIIC_DRIVERS as well, with yes/no for enable flag. (#11426) 2021-01-04 08:45:43 +11:00
Nick Brassel
271c0cf136 Merge remote-tracking branch 'upstream/master' into develop 2021-01-03 15:26:43 +11:00
Ryan
f3ac792c09
Align ChibiOS spi_master behaviour with AVR (#11404)
* Align ChibiOS spi_master behaviour with AVR

* Rollback `spi_transmit()` and `spi_receive()` to preserve DMA
2021-01-03 14:53:53 +11:00
Aldehir Rojas
4f2f21dc05
Rewrite APA102 support (#10894)
* Rewrite APA102 support

The APA102 source was broken by commit 16a15c1cfc as it did not include the
quantum header. This commit addresses that, as well as other issues with
transferring bytes over the SPI interface, i.e. it was not setting the
clock pin back to low after sending a bit.

The deviation when sending the end frame is kept, but updated to the
latest from the referenced project.

Finally, these changes expose the global LED brightness parameter
of the APA102. Brightness values are configurable through
`APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`.

* Fix typo in led brightness extern

* Move driver out of AVR directory and add delay for ARM

* Experimental APA102 support on AVR and ARM

Co-authored-by: Alde Rojas <hello@alde.io>

* Refactor apa102_send_byte() calls to a loop

* Implement io_wait function for ARM

* Move APA102 drivers to own directory, fix copyright notice

* Add APA102 keymap to handwired/onekey

* Simplify RGBLIGHT_ENABLE/DRIVER option handling

Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
2020-12-30 00:28:49 +00:00
QMK Bot
99d6349978 Merge remote-tracking branch 'origin/master' into develop 2020-12-27 17:37:04 +00:00
Ryan
1b7b72c0e9
Ensure single newline at EOF for core files (#11310) 2020-12-28 04:36:32 +11:00
QMK Bot
0b37c0dfa0 Merge remote-tracking branch 'origin/master' into develop 2020-12-26 04:56:43 +00:00
Ryan
1d1d5da43f
Change include guards in tmk_core/ and drivers/ to pragma once (#11240) 2020-12-26 15:56:11 +11:00
QMK Bot
06f9297f94 Merge remote-tracking branch 'origin/master' into develop 2020-12-18 17:29:08 +00:00
Joel Challis
a9f7d4dccc
Various compilation fixes for avr-gcc 10 (#9269) 2020-12-18 17:28:29 +00:00
fauxpark
7797070b37 Merge remote-tracking branch 'upstream/master' into develop 2020-12-18 02:15:28 +11:00
Ryan
6ea4b06f9f
Run cformat and dos2unix manually (#11235) 2020-12-17 14:06:30 +00:00
QMK Bot
2e0f2025bd Merge remote-tracking branch 'origin/master' into develop 2020-12-16 03:27:52 +00:00