qmk_firmware/keyboards/1k/readme.md
MakotoKurauchi bdd1f318c3
[Keyboard] New kbd 1k (#15509)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-04-19 20:39:43 +10:00

47 lines
1.6 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# 1k
![1k](https://booth.pximg.net/aaeb2dda-e169-44c0-ba5a-5b42cc5c2627/i/3504781/c1708a8a-061b-4a6c-907d-72d0eab47d4a.png)
1% Custom mechanical keyboard. ATtiny85 powered, with 1*WS2812 LED, and the micronucleus bootloader.
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
* Keyboard Maintainer: [MakotoKurauchi](https://github.com/MakotoKurauchi)
* Hardware Supported: 1k
* Hardware Availability: [booth](https://ninep.booth.pm/items/3504781)
Make example for this keyboard (after setting up your build environment):
make 1k:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Flashing
### Prerequisites
```bash
git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install
```
On Linux, youll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
```bash
sudo udevadm control --reload-rules
sudo udevadm trigger
```
### Instructions
```bash
make 1k:default:flash
# or directly with...
micronucleus --run <firmware.hex>
```
### Recovery
* [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)